Levelone FCS-0031 User Manual download pdf (Page 19)

- 14 -

Access to the Network Camera

Check Network Settings

The Network Camera can be connected either before or immediately after software

installation onto the Local Area Network. The Administrator should complete the network

settings on the configuration page, including the correct subnet mask and IP address of

gateway and DNS. Ask your network administrator or Internet service provider for the detail

information.

Add Password to prevent Unauthorized Access

The Administrator should immediately implement a new password as a matter of

prudent security practice. The user name and password for the Administrator are assigned

as “admin/admin”. Once the Administrator’s password is saved, the Network Camera will ask

for the user’s name and password before each access. The Administrator can set up a

maximum of ten (10) user accounts. Each user can access the Network Camera except to

perform system configuration. Once the password is changed, the browser will display an

authentication window to ask for the new password. Once the password is set, there is no

provision to recover the Administrator’s password. The only option is to restore to

the original factory default settings.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

No comments

Levelone FCS-0031 User Manual Page 19