LevelOne GVS-3110 User Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
2
1. Introduction
1-1. Overview
The LevelOne Media Converter-Web Smart Series is designed to make
conversion between 10/100Base-TX and 100Base-FX or 10/100/1000Base-TX and
100/1000Base-FX Ethernet. With web-based management and Telnet text-based
manual driven management, the network administrator can logon the remotely
converter to monitor, configure and control the status of each unit. The overall
network reliability is enhanced, and the network efficiency is also improved to
accommodate and deliver high bandwidth applications.
The 19-inch Media Converter Rack, CVH-3000, is designed to
accommodate 12 units of various type of web smart media converter at a central
location for multiple segments cross connection. DC 48V power supply is used and
provided by Telecom site. The Rack provides solutions for users to best manage
media converters. Since converter is connected directly to the chassis main-board,
no power cable or wire is required for connection. Moreover, a redundant power
supply is offered in the power supply set to cope with any accidental breakdown of
power supply.
1-2. Features
The Web Smart Media Converter provides the following features for users to
perform system network administration.
Management
• Supports Web UI for management
• Supports OAM for remote management via TS-1000
• Supports OAM for remote management via IEEE802.3ah
• Supports Ingress/Egress Rate Limitation
• Supports Link Loss Carry Forward Function
• Supports per Port MIB Counters
• Supports IEEE802.1Q VLAN
• Supports Q-in-Q (Double-Tag) VLAN
• Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
• Supports auto mode on the TP port
• Supports jumbo frame 9KB
• RoHS Compliance
• On-board firmware can be updated via HTTP web function.
The converter allows administrator to reboot system from management station.
• Dying Gasp function can send out a signal when DC power down is detected.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Comments to this Manuals

No comments