LevelOne PLI-3510 200Mbps Powerline Adapter with Mains Pass-Through User Manual
8 Chapter 3 – Configuration Utility Setup Introduction The Configuration Utility enables the users to identify HomePlug devices on the powerline net
9 The Main screen provides a list of all powerline devices logically connected to the computer when the utility is running.The top panel shows all
10 above the Remote devices panel showing whether the Autoscan functionality is turned ON or OFF. The following information is displayed for all dev
11 Password column by default is blank and ‘Enter Password’ button can be used to enter it. To set the Password of the device (required when creat
12 Add button is used to add a remote device to the existing network by entering the device password of the device. A dialog box will appear as sh
13 The Scan button is used to perform an immediate search of the HomePlug devices connected to the Powerline network. By default, the utility automa
14 3.2 Privacy Screen The Privacy screen provides the user with an option to maintain security for their logical network and also to select the devi
15 password’s were not entered, this operation will fail and will report a failure message. 3.3 Diagnostics Screen The Diagnostics screen shows Syst
16 The Lower panel contains a history of all remote devices seen on the computer over a certain period of time. All devices that were on the powerli
17 Chapter 4 – Reset and Network ID Buttons Setting There are 2 buttons on the device, one is Reset button the other is Network ID button. 4.1 Rese
Table of Contents Chapter 1 – Introduction ...
18 Four possible scenarios This section describes how to add and remove devices using HomePlug AV Simple Connect Technology and covers some of the t
19 Case 2: Joining a Network In this scenario a network exists. The user wants a new device, the ‘joiner’, to join the network. Any device on the ex
20 Case 3: Leaving a Network A network exists. The user wants to remove one device, the ‘leaver’, from that network, for whatever reason. He may wan
21 Case 4: Join Multiple Devices to a Network To add several new devices to an existing network, the process in Case 2 must be repeated for each ‘jo
1 Chapter 1 – Introduction 1.1 Overview The LevelOne PLI-3510 operates on HomePlug AV standard, providing up to 200Mbps data speed over the existi
2 Chapter 2 – Installation & Uninstallation Connection of Powerline Ethernet Adapter 2.1 Installing Powerline Device 1. If you
3 2.2 Installation of Powerline Utility The Configuration Utility enables the users to identify HomePlug devices on the Powerline network; measures
4 4. Click “Setup” button to continue. 5. Click “Next” button to continue. 6. Click “I Agree & Next ” button to continue.
5 7. Click “Next ” button to continue. 8. Click “Close ” button to exit.
6 9. In order to start the utility, double-click the utility icon on desktop. 10. You can see your device working well. The top panel of the scre
7 2.3 Uninstallation of Configuration Utility 1. To uninstall the Configuration Utility, go to the “Control Panel” of your system. 2. Open the “Ad
Comments to this Manuals