Levelone KVM-0422 User Manual

LevelOne KVM-0221/KVM-0421 KVM-0222/KVM-0422 2/4-Port USB KVM Switch User Manual Ver. 1.0.0-0711

7 All the hotkeys are only functional after PCs are booting into the OS. If user would like to switch PC in the BIOS or pre-boot stage, press the fac

8 3. KVM Switch Utility Operation In addition to PC switching, the KVM Switch Utility also provides user more advanced functions such as described i

9 Switch to PC x by Keyboard Hotkeys Hit the hotkey according to your current hotkey definition: Hotkey sequence = Ctrl + Alt + [command key]* * T

10 Fix Audio Port at PC x Check this option and then select the PC to fix the audio/mic channel to the selected PC. Once this option is checked, the

11 4. Switch Mode on Various Operating System Operating System USB KVM Switch Windows - Face-panel button - Software Menu Switching - User-defina

12 5. Technical Specification Model No. KVM-0221/0222 KVM-0421/0422 PC Port 2 4 PC Port Connector (All Female Types) VGA HDDB 15pin-F (integrate

ii Safety FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditio

iii Table of Contents 1. INTRODUCTION...

1 1. Introduction LevelOne KVM-0221/KVM-0421/KVM-0222/KVM-0422 is 2/4-port Slim Desktop USB KVM Switch with optional audio and microphone switching

2 1.2 Package Contents  KVM-0221/KVM-0421/KVM-0222/KVM-0422  KVM Cable Set  CD Manual  Quick Installation Guide Check to make sure that all

3 2. Hardware Installation The default setting of the KVM-0221/KVM-0421/KVM-0222/KVM-0422 is appropriate for most systems. The KVM Switch is a Plug-

4 instructions to completion. When installation is complete, a LevelOne icon will be on the system tray of user’s desktop. For operation details of t

5 Note Some older computers with USB interface might need to manually enable the USB option in the BIOS setting before using USB devices. If USB i

6 Keyboard hotkey There are two kinds of hotkey, User-definable hotkeys and Universal hotkey. For user-definable hotkey, user must install the sof