Levelone WNC-0305USB User Manual Page 1

LevelOne WNC-0305USB 11g Wireless USB Adapter User Manual V1.0.0-0612

Figure 8: Site Survey Screen – Connected To Connect to a Wireless Network with Encryption • Double-click on the desired network. or • Click the na

Profile Manager Screen This screen is accessed by clicking the Profile Manager tab on the main screen. Figure 10: Profile Manager Screen Data - Pr

Wireless Mode Select the desired wireless mode to which you want to connect. This option only available under Ad-Hoc mode, it allows user to select th

Encryption Method The available options depend on the Authentication method selected above. The possible options are: • Security Off - No data encryp

To edit a profile 1. On the Profile Manager tab, select the profile that you want to edit. 2. Change the profile settings as necessary. 3. Click Sa

Data - Advanced Settings Screen Do not change settings Enable this check box if you don’t want to modify the settings in this screen. Preamble (2.4GHz

Network Status Screen This screen displays the status of the current wireless link. Clicking the Network Status tab will display a screen like the fo

Internet Protocol DHCP Option It shows if the IP address was automatically obtained from a DHCP server. IP Address It shows the current IP address on

This tab shows the following information: Wireless Adapter Information • Regional Domain • Firmware Version • Driver Version • MAC Address Utility Inf

Appendix A Specifications USB Adapter Bus Type: USB 2.0 54, 48, 36, 24, 18, 12, 9, and 6 Mbps (802.11g) Data Rates: 11, 5.5, 2, 1 Mbps (802.11b) F

Table of Contents CHAPTER 1 INTRODUCTION... 3 LED ...

Operating temperature:0o to 40oC (32o to 104oF) Operating humidity: 0 to 90% non-condensing Notebook or desktop PC with USB port; USB 2.0 required for

Appendix B About Wireless LANs This Appendix provides some background information about using Wireless LAN (WLAN). Modes Wireless LANs can work in e

Different Access Points within an ESS can use different Channels. In fact, to reduce interference, it is recommended that adjacent Access Points SHOUL

CE Marking Warning Hereby, Digital Data Communications, declares that this (Model-no. WNC-0305USB) is in compliance with the essential requirements an

Chapter 1 Introduction This Chapter provides an overview of the Wireless Adapter's features and capabilities. Congratulations on the purchase of

Chapter 2 Initial Installation This Chapter covers the software installation of the Wireless USB Adapter. Requirements • Windows 2000 or XP. • Avai

Figure 2: Installation Screen 6. Click "Continue Anyway" on the screen above. Figure 3: Information 7. Insert the USB Adapter into

8. The Windows "New Hardware" wizard will then start. • Select No, not this time then click “Next” • Select Install the software automati

Chapter 3 Using the Windows Utility This Chapter provides Setup details for the AP mode of the Wireless Adapter. Overview If using Windows, you can

Connecting to a Wireless Network Double-click the icon to open the Site Survey screen, when you can select the Wire-less network you wish to join. Au

Data - Site Survey Screen Display PC To PC (Ad-Hoc) Select this check box to display ad-hoc (computer-to-computer) networks. Display 802.11b Access Po