LevelOne WAB-7000 User Manual download pdf (Page 36)

11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 1.0

4 Access Point Mode – Web Configuration

4.1 Logging In

 To configure the Access Point through the web-browser, enter the IP address of the

Access Point (default: 192.168.1.2) into the address bar of the web-browser and

press Enter.

 Make sure that the Bridge and your computers are configured on the same subnet.

Refer to Chapter 2 in order to configure the IP address of your computer.



After connecting to the IP address, the web-browser will display the login page.

Specify the User Name and Password. The default user name and password are

levelone then click on the Login button.

 After logging in you will graphical user interface (GUI) of the Access Point. The

navigation drop-down menu on left is divided into seven main sections:

1. System: This menu includes system related settings such as firmware upgrade,

reset to factory defaults, system date/time configuration and configuration wizard.

2. Wireless: This menu includes the settings such as network visibility, channel, data

rate, and security. Also included are advanced wireless settings such as wireless

MAC clone and RTS/fragmentation threshold.

3. LAN: This menu includes the LAN and DHCP client/server settings.

4. Filter: This menu includes MAC address filter settings.

5. Logs: This menu displays the system log.

6. Status: This menu displays the wired and wireless statistics

Help: This menu describes the features of the device and the parameters for each

setting.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 63 64

No comments

LevelOne WAB-7000 User Manual Page 36