LevelOne 22Mbps User Manual download pdf (Page 21)

4.3.2.1 Ethernet Over ATM (RFC 1483 Bridged) without NAT

This WAN type disable the NAT, this device becomes a pure bridge between your LAN and WAN, all

the clients in your LAN must have legal IPs. If you enable the NAT feature, you have to set the

following WAN IP settings.

WAN IP Address, WAN Subnet Mask, WAN Gateway, and Primary/Secondary

DNS

These settings are also specified by your ISP.

VPI/VCI Numbers:

The channel settings provided by your ISP.

Schedule Type:

The setting of the ADSL traffic schedule type. This device supports UBR (Un-specified bit rate) and

CBR (Constant bit rate). Once you finished the required configuration, you must click on the "Save"

button to save the configuration into Flash memory, and the reboot this device.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 98 99

No comments

LevelOne 22Mbps User Manual Page 21