Levelone WBR-6022 User Manual

LevelOne User Manual Ver. 1.4 WBR-6022 300Mbps Wireless HomeGuard 22 Router

10 Rear View Power Jack • Receptor for the supplied power adapter LAN Ports (1~4) • Connect Ethernet devices such as Level1 IP Cameras, computers,

11 3.2. Hardware Installation 3.2.1. Decide where to place your Wireless Router You can place your Wireless Router on a desk or other flat surface.

12 C. Connect the Computer LAN cable. D. Plug in the Power Adapter E. Wait until the Status light is blinking steadily. This means the router i

13 F. Plug in the IP Camera & NAS for the Surveillance environment Please refer the below Diagram 3.2.2. Check Your Network Settings A. Pleas

14 4 Setup the WBR-6022 Home Surveillance Once properly configured, the WBR-6022 Wireless HomeGuard 22 Router will obtain and assign IP address info

15 Click “Next” to continue. Select Wizard, the application will go steps one by one.

16 First, you have to make sure that your hardware connections are all correct. Click “Next” to continue. Then, you have to adjust the time zone. T

17 Setup the Power Management schedule, and then click “Next” to continue. Smart Schedule means, when the router should go to sleep mode due to the s

18 For wireless setting, the default SSID of wireless interface is “LevelOne”, default channel is 11, and default encryption option is “NONE”. You co

19 Next step, we will help you to setup the WAN configurations. Please follow the wizard, and choose the WAN type you used. Click “Next” to continu

2 Safety FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interfer

20 Click “Next” to continue Now prepare to test the WBR-6022’s Level1DNS connection and account name. Click “Next” to continue.

21 The application would show you a default domain name that combined with this product, please remember this domain name, next time you want to remo

22 4.2 Quickly to Setup a HomeGuard system To setup the HomeGuard system it needs few steps to complete all the setting: 1. Connect all the IP came

23 4.2.1 HomeGuard Configuration A. Open an IE browser and type in the IP Address http://192.168.0.1 (The Active-X works with IE only) B.

24 C. Main page Select your Language Main Feature Multi-Language Select IP Devices List On Line Help

25 4.2.2 Search New Device Click the “Search New Device” icon, the HomeGuard start searching all compatible IP devices Connected by WB

26 Model Name & Username / Password Model Name Username / Password FCS-0010 / WCS-0010 Default username is “administrator” and leave the passw

27 Step 4 Sync the device’s System Time & Click “Save” Step5 Click “Next”

28 4.2.3 Setup Device & Level1DNS A. Setup the Status for Camera & NVR Click “Status” HomeGuard will show the registered IP camera on t

29 NVR SettingS You can change New device name or leave by blank then Click “Save” B. Setup the Level1DNS Dome Name Click “System” and Then C

3 General Public License This product incorporates open source code into the software and therefore falls under the guidelines governed by the Genera

30 Enter your preferred Domin Name for your dedicated WBR-6022 HomeGuard (Example: henry)

31 Please click the bottoms by order 1. Click “Test server” to Test the connection with the Level1DNS.net service available or not 2. Click “Sear

32 4.2.4 View the video A. View the single IP Camera’s Video Step1 Click the IP Camera list on the left Step2 Select device(s) and viewing S

33 Click “Record” each time will only save for 10 mins to FNS-1020 Going to “Schedule” to configure always record If you can not see the video di

34 4.2.5 Playback the Record Notice: this feature only available when you have registered FNS-1020v2 Click “Status” then Click “FNS-1020 Please

35 4.2.6 Schedule Record Step1 Click “Schedule” then Click “Setup” to enter schedule setting

36 Step2 Click “Save”

37 4.3 Detail to Setup a HomeGuard system 4.3.1 View , SNAP and Record A. View All IP Cameras Enter the “View All” page under “Status” tag, the

38 C. View PTZ IP Camera The WBR-6022 also support some of Pan/Tilt camera, it will show the Pan/Tilt control item after camera registered. D. Sna

39 E. Record IP camera I. When you are viewing the IP cameras, you could press “Record” button to record video from IP camera to ne

4 Table of Content TABLE OF CONTENT ...

40 Refresh Click the “Refresh” button to refresh this page. Delete Click the “Delete” button would remove the remark record. Protect Click the

41 4.3.3 Advanced Setting 1. Account Management Press the “Account Management” link under “System” tag. A. Administrator Management You could

42 C. Normal User Management You also could modify normal user account here. 2. Email Alert Press the “Email Alert” link under “System” tag, you

43 4. Change Alias Domain Name Press the “DDNS Alias” link under “System” tag. The WBR-6022 had build-in level1dns.net service, default is using d

44 5. Login Tool The WBR-6022 had build-in level1dns.net service, it will bundle a DDNS number for remote access. Please make sure the WBR-6022 has

45 5 Router setting Type in “password” (without quotes) in the Password box, then click Login Note: password is the default login password for the

46 Remember to set up the Sleep Mode to enable the Power Saving features. Once the user finishes those steps and the router screen displayed as belo

47 5.2 Advanced Setup To access the Advanced Setup, click on Advanced Setup at the top of the page. Or, for first time installation, choose Adva

48 5.2.1 Basic Setting These are the basic settings of the unit. Click on the menu on the left to access the respective settings p

49 Green Function The Power saving function allows you to set the time that the router enters into Sleep Mode. This means that the router can automat

5 1 Introduction Congratulations on your purchase of LevelOne WBR-6022 Wireless HomeGuard 22 Router. This product is specifically designed for Smal

50 Low Power Wireless Mode: When no wireless clients are connected to the router, it will reduce power to the radio to save power. When a dev

51 Connect-on-Demand: The router will automatically connect to the Internet when a computer in the network requests Internet usage. Auto-reconn

52 PPP over Ethernet 1. PPPoE Account and Password: the account and password your ISP assigned to you. For security, this field appears blank. If yo

53 • Auto-Reconnect (Always-on): The device will link with ISP until the connection is established. • Manually: The device will not make the link u

54 For more settings click on More. DHCP Server: To either Disable or Enable DHCP Server. IP Pool Starting/Ending Address: The pool of IP’s that can

55 SSID Broadcast: The WBR-6022 will broadcast beacons that contains SSID and other wireless information so that Computers or other wireless devices

56 WPA-PSK, WPA2-PSK, WPA / WPA2-PSK This security is more secure compared to WEP. Please enter the key in the Preshare Key field. The field can be be

57 RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. W

58 WPS (WiFi Protected Setup) WPS feature is following the Wi-Fi Alliance WPS standard and it eases the set up of security-enabled Wi-Fi networks in t

59 Enter PIN number of Wireless Adapter It is also possible to use the PIN number you have set on the wireless adapter. Set the adapter as Enrollee an

6 2 Product Features This chapter provides the package contents and setup information for the Wireless HomeGuard 22 Router. Features HomeGuard func

60 Now initiate the WPS by clicking the PIN button on the wireless adapter’s utility. Push Button Method Change the Config Method to “Push Button.

61 If your device has no physical WPS push button, then you can push the software button in the utility. WDS (Wireless Distribution System) WDS ope

62 Change Password This page allows you to change the WBR-6022 Web Configuration password. Please type in the old password (factory default passwor

63 5.2.2 Forwarding Rules This page allows you to configure the port forwarding management of the WBR-6022. Use the menu on the left to access the s

64 Virtual Server A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the

65 Special AP Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, etc. Because of the fire

66 Miscellaneous Items IP Address of DMZ Host Here you can set the DMZ (Demilitarized Zone) Host. It is a computer that does not

67 5.2.2.1 Security Settings This section allows you to configure the security management of the unit. Click on the menu on the left to access the

68 Packet Filter Packet Filters allows you to control what packets are allowed to pass through the WBR-6022. The Outbound Filter applies to all outb

69 For source or destination IP address, you can define a single IP address (192.168.0.1). An empty implies all IP addresses. For source or destinat

7  Sleep Mode: When time matches with rule of Schedule, Green Router will detect whether any client or Network flow. If No, Green Router will be in

70 Domain Filter The Domain Filter enables you to prevent users from accessing specific domain addresses (web sites). To enable Doma

71 URL Blocking URL Blocking will block LAN computers from connecting to a pre-defined Web Site. The major difference between Domain F

72 MAC Address Control The Domain Filter enables you to prevent users from accessing specific domain addresses (web sites). To enabl

73 MAC Address MAC address indicates a specific client. IP Address Expected IP address of the corresponding client. Keep it empty if you don't

74 Miscellaneous Items This page allows you to change various miscellaneous security settings. Administrator Timeout: The amount of time with no a

75 5.2.2.2 Advanced Settings These pages allow you to configure the more advanced settings on the unit.

76 System Log The WBR-6022 supports both Syslog (using UDP packets) and E-Mail alert. For Syslog, you will need to enter the IP address

77 Dynamic DNS Dynamic DNS is a feature that allows users to set up a static domain name even when they have a dynamic internet IP address. So even

78 QoS Rule Here you can set the parameters for QoS (Quality of Service). This function allows you to specify which types of data packets are given

79 SNMP Setting SNMP (Simple Network Management Protocol) is designed to give users the ability to remotely manage a computer or networ

8 3 Package contents & Hardware Installation 3.1. Package Contents Open the box of the Wireless HomeGuard 22 Router and carefully unpack it. T

80 Routing When you have more than one WBR-6022, or router with different subnets on the network, you will need to enable this function to allow the

81 Destination Subnet Mask Gateway Hop Enabled 192.168.1.0 255.255.255.0 192.168.123.216 1  192.168.0.0 255.255.255.0 192.168.123.103 1 

82 System Time This page allows you to set the time settings of the WBR-6022. Time Zone: Select the time zone for your location. Auto-Synchroniza

83 Schedule Rule This feature allows you to define the time schedule of Virtual Server and Packet Filter rules. To enable Scheduling, tick Enable

84 Then create new rules by pressing the New Add button. Enter the Rule’s Name and set the Start and End Times for each day. Then click Save to sav

85 5.2.2.3 Toolbox This section has some basic tools to maintain the WBR-6022’s systems.

86 System Info View the Log of the router. It can also be exported to a text file.

87 Firmware Upgrade This page allows you to perform updates to the firmware of the WBR-6022. To use, click Browse and locate the firmware image fi

88 Miscellaneous Items MAC Address for Wake-on-LAN Wake-on-LAN is a technology that enables you to power up a networked device remotely. In order

89 Appendix A 802.1x Setting Figure 1: Testing Environment (Use Windows 2000 Radius Server) Equipment Details PC1: Microsoft Windows XP Pr

9 Front View WLAN Button • Press and hold for 3 seconds to turn the Wireless LAN on or off. • Please confirm WLAN status as indicated by WLAN Ligh

90 DUT and Windows 2000 Radius Server Setup Setup Windows 2000 RADIUS Server We have to change authentication method to MD5_Challenge or using smart

91 Windows 2000 RADIUS server Authentication testing: DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.) 1. Download an

92 Figure 6: Authentication success DUT authenticate PC2 using PEAP-TLS. 1. PC2 chooses the SSID of DUT as the Access Point. 2. Set authentica

93 Appendix B FAQ and Troubleshooting What can I do when I have some trouble at the first time? 1. Why can’t I configure the router even if th

94 2. Why can’t I connect the router even if the cable is plugged in LAN port and the LED is light? A: First, please check Status LED. If the devic

95 4. Why can I not connect to the Internet even though the cables are plugged in WAN port and LAN port and the LEDs are blink? In addition, the Stat

96 How do I connect router by using wireless? 1. How to start to use wireless? A: First, make sure that you already installed wireless client dev

97 Then click and will see the AP list that wireless client can be accessed: If the client cannot find your wireless router, please refresh network

98 2. How can I use AES encryption of WPA-PSK to connect? A: First, you must check if the driver of wireless client supports AES encryption. Please r

99 Technical Specifications General Model WBR-6022 Wireless HomeGuard 22 Router Data Transfer Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps Ma