LevelOne IPS-0008 User Manual

IPS-0008 IP Power Switch User Manual Ver 1.0.1-0710 1

1.3.2. Status Indicator The front panel of the IPS-0008 has several LED indicators that provide information about the input and output power status.

Status Indicator Description Input power consumption indicator Displays input power consumed by the output devices connected to the IPS-0008 outle

1.3.3. Using the control buttons You can turn on power manually for each of the eight output devices with the control buttons provided under each sta

Power on/off mode 1. Press the control button twice. The outlet power indicator starts flashing green. 2. Now press control button again within 5 se

Rear Panel Component Component Description 1 Input power Connect to a power outlet. 2 Breaker Prevents excessive current flow to protect the

2. Getting Started This section provides information about setting up the IPS-0008, connecting power, and connecting devices to it before you start u

2.3. Making Connections The IPS-0008 is a versatile product that can be connected to several different types of input and output devices. This makes

The following procedure describes the basic steps needed to set up the IPS-0008: 1. To set up the hardware, connect power to the power inlet and out

2.4. Connecting Input Power The IPS-0008 has an IEC C20 power inlet for supplying and managing power for the output devices. Connect the power cord t

2.5. Connecting Output Devices The IPS-0008 has eight power outlets for connecting devices such as workstations, servers, and printers. Their power o

Preface About this manual Congratulations on purchasing the IPS-0008. This user manual provides detailed descriptions of the hardware components and

2.7. Connecting EMD An environmental monitored device that is connected to sensors for detecting temperature, humidity, water level, and so on can be

2.8. Connecting The Console You can control the output devices and manage their power status through a console or serial connection with your PC. Use

2.9. Connecting To a WAN The IPS-0008 has an RJ-45 LAN connection that enables you to monitor and manage the power outlets and digital outputs over t

3. Using the Console Menu The IPS-0008 is provided with a serial port that enables you to configure and control the system through your PC’s RS-232 s

3. From the Connect using drop-down box, select the COM port that you have connected to the IPS-0008. Click OK when done. 4. The Properties wind

The main menu options are displayed. 21

3.2. Navigating Through the Console Menu Follow these steps to navigate through the console menu to modify settings:  To select a submenu, type th

The console menu consists of the following submenus:  IPS-0008 Configuration: This is the primary menu consisting of various submenus such as the sy

3.3. Setting the IP Address Follow these steps to set up the IP address of the IPS-0008: 1. Using the steps described under “Navigating through the

4. Using the Web Interface The IPS-0008 provides a graphic user interface that can be viewed from a web browser such as Internet Explorer. This enabl

Safety instructions Follow these safety instructions to avoid injury to self and damage to the IPS-0008.  To reduce the risk of fire or electric sho

The main page shows a graphic representation of the IPS-0008 outlets and inputs status as described below:  The left pane shows the various menus a

4.2. Modifying the Basic Settings The System menu enables you to configure the IPS-0008 system parameters such as the administrator name, password, I

4.2.2. Adding Users Click Multi-User under System to create a list of users who can access and control the IPS-0008. You can add users who can only

4.2.3. Changing Event Alert Settings The IPS-0008 sends email or SNMP trap alerts to specified users when specific events occur. Use the following st

Click Email Notification under Sys- tem to set up a list of up to 8 users who will be alerted with an email. Use this menu to specify the mail serve

4.3. Modifying Application Settings The following sections describe how to use the Power Management and Environment menus to control the system input

4.3.2. Setting Up a Schedule Click Schedule under Power Management to see a list of schedules for turning power outlets on or off as desired. For ins

4.3.3. Status Click Status under Environment to see the status of the EMD connected to the IPS-0008. The menu page displays the temperature and humid

34

4.4. Power Cycle User can enable once power On/Off to restart the crash device for each of the eight outlet with Power Cycle button. This function w

Table Content 1. INTRODUCTION...1 1.1. FEATURES.

Appendix Specifications Power Input/Output 110V model  AC Input: IEC C20 inlet, 15 Amp, 100 ~ 125VAC, 50/60Hz  AC Output: NEMA 5-15R outlet, 15

Error codes Error code Description E01 Network link down E02 Parameters checksum error E03 Input voltage over threshold high (Volt) E04 Input volt

Regulatory information FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:  This dev

39

1. Introduction Congratulations on purchasing the IPS-0008, an intelligent power management system. The IPS-0008 provides the useful ability of mana

1.1. Features  Eight power outlets that can be turned on or off in multiple ways, with easy monitoring of current consumption  Active extended de

1.2. Package contents Make sure that your package has the following items. If any of items is missing or damaged, contact your nearest service center

1.3. Hardware Components Take a moment to familiarize you with the IPS-0008 front and rear panels. The following sections provide descriptions about

Component Description 5 Reset button Enables you to reset the IPS-0008 in case the system locks up. 6 Operation mode DIP switch Sets the mode