Levelone FCS-8006 User Manual download pdf (Page 66)

Intelligent Surveillance Solution

LevelOne IP CamSecure

- 65 -

4.2.5 Action Type - Phone Call

The system will call a given phone number when an unusual event is detected.

* Note: This function is not available under Lite License.

Step 1: Select the Phone Call action and then click OK.

Step 2: The responding window will popup to Select Contactor and key-in the message which want to

append on SMS content. (You can choose one more contact at once).

Note: To setup the phone number and make an audio record for the phone call, go to Config - Setup

- Hotline. See Configuration on page 77l.

4.2.6 Action Type - PTZ Preset Go

The PTZ (pan/tilt/zoom) camera will go to a preset point or auto patrol when an unusual event is

detected.

* Note: This function is not available under Lite license.

Step 1: Select the “PTZ Preset Go” action and then click OK.

Step 2: The responding window will pop up to PTZ Camera Preset Go. Click the “PTZ Preset Go” indicator to

modify the setting.

Step 3: Set the action of cameras which you want to trigger by events.

For example: Please follow below steps to setup this function.

 Set the action of camera 1:

1. Choose camera 1.

2. Set the start, end preset points.

3. Select the Life Cycle.

4. Click on Add.

 Set the action of camera 2:

5. Choose camera 2.

6. Set the start patrol and end patrol.

7. Select the Life cycle

8. Click on Add.

9. Finally click on Ok to save all setting of cameras.

Note: Configure your PTZ camera before using this function. See Config on page 75 for PTZ camera

configuration.

4.2.7 Action Type – DI/DO

To trigger Digital input/output devices connected to the system, such as alarm lights and sirens.

Step 1: Select the “DI/DO” action and then click OK.

Step 2: The responding window will prompt user to Select Digital Input Module. Click the “DI/DO” indicator to

modify the setting.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 138 139

No comments

Levelone FCS-8006 User Manual Page 66