LevelOne 22Mbps User Manual download pdf (Page 9)

2.1.2. Rear Panel

Figure 2-2 Rear Panel

Ports:

Port Description

5VDC

Power inlet: DC 5V, 2.5A (minimum)

WAN

The port where you will connect your phone jack.

Port 1-4

The ports where you will connect networked computers and other

devices.

PRINTER

Printer Port

RESET

To reset system settings to factory defaults, please follow the steps:

1. Power off the device,

2. Press the reset button and hold,

3. Power on the device,

4. Keep the button pressed and watch the M1 LED, when they flash 8

times then release the reset button.

2.2 Procedure for Hardware Installation

1. Decide where to place your Wireless Broadband Router

LevelOne WBR-2401 can be placed on a desk or other flat surface, or you can mount it on a wall.

For optimal performance, place your Wireless ADSL Broadband Router in the center of your office

(or your home) in a location that is away from any potential source of interference, such as a metal

wall or microwave oven. This location must be close to power and network connection.

2. Setup LAN connection

a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one

of the LAN ports of this product.

b. Wireless LAN connection: locate this product at a proper position to gain the best transmit

performance.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 98 99

No comments

LevelOne 22Mbps User Manual Page 9