Levelone GES-0852 User Manual Page 1

1 LevelOne GES-0852 8 GE with 1 Combo SFP Web Smart Switch User Manual Version 1.0-1109

10 Functional Description Jumbo Frame With Jumbo Frame supported, it is allowed for the switch to transport identical data in fewer frames. Hence he

11 Management guide Access the Switch This section instructs you how to enter and proceed the advanced management capability, which can be accessed

12 Homepage After authentication procedure, the “SYSTEM Configuration” page shows up as the Homepage. You may click the hyperlinks on the left side

13 System The “System” window provides the switch information and allows users to configure the switch properties. Items Functions MAC Addres

14 Port This “Port Configuration” page shows the link status of each port and allows users to configure speed, flow control and Max frame size for e

15 VLAN VLAN divides the network members into groups to reduce packets collisions and improve the network efficiency. The switch supports 802.1Q tag

16 PVID When the VLAN-enabled switch receives a tagged packet, the packet will be sent to the port’s default VLAN according to the PVID (port VLAN I

17 Aggregation/ Trunk Configuration To set up the port trunk groups, put the ports number into the same aggregation group. There are four groups to

18 Quality of Service QoS enhances the communication quality by giving different precedence to classified packets. This switch provides port-based,

19 Port-based mode QoS: The port-based QoS allows users to configure certain ports as high or low priority. To give priority level for each port:

2 FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

20 Tag based QoS: The tag-based QoS decides packet priority according to the tags that adding on the packets. To configure Tag-based QoS configura

21 DSCP mode QoS: The DSCP mode QoS gives packet priority by the precedent types attaching on the incoming packets. The types of precedence: 000

22 Mirror The “Mirror” function copies all the packets that are received or transmitted by the source port to the destination port. It allows admini

23 Storm Filter This “storm filter” page allows users to configure the rules for storm control, which limits the flow of broadcast and multicast

24 SNMP This device supports SNMP-management, which allows network administrators to monitor and configure this device with SNMP software. To allow

25 Discovery After installing series of LevelOne gigabit web smart switches(GES-0852/1641/2440), the discovery management tool helps users to search

26 Statistics Overview The “Statistics Overview” is provided for users to see the general transmitting and receiving status of each port. You may

27 Restart Restart: To restart the system, click the “Yes” button. The system will restart and show the authentication window. Please fill in the

28 Software Upload This “Software Upload” page allows users to upgrade firmware for this switch. To perform firmware upgrade: 1. Click the “Brow

29 Product Specifications Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3x full-duplex operation and flow control IEEE802.3ab/z 1000BAS

3 Table of Contents UNPACKING INFORMATION ... 5 INTRODUCTION ... 5 GENERAL DESCRIPTI

4 VLAN ... 15 PVID ...

5 Unpacking Information Thank you for purchasing GES-0852 Gigabit Web Smart Switch. Before you start, please verify that your package contains the fo

6 The Front Panel The front panel consists of LED indicators. Please refer to the following paragraph for information. LEDs Definition

7 The Rear Panel The rear panel of the switch: Port Operation The auto-negotiation feature allows those ports running at one of the following op

8 Installation This switch can be placed on your desktop directly, or mounted in a rack. Please refer to the instructions for installation. Before i

9 Installing Network Cables 1. Crossover or straight-through cable: All the ports on the switch support auto-MDI/MDI-X functionality. Both straigh