Levelone FCS-8006 User Manual download pdf (Page 59)

Intelligent Surveillance Solution

LevelOne IP CamSecure

- 58 -

 Cancel event after timeout xx seconds: Enable checkbox and set the timeout seconds to cancel the

event after a specific time whether the event disappears or not.

4.1.3 Camera Event - Signal Lost

Detect the loss of video signal from camera.

4.1.4 Camera Event - General Motion

- Detect any movement in the defined detection zone.

Alarm Event Option:

 Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement

will trigger the alarm. Move the bar to the left to reduce the sensitivity. Setting up an appropriate

sensitivity value will minimize false alarms. For example, you can lower the sensitivity to avoid the alarm

being triggered by a swinging tree in the breeze.

 Interval: Click and move the slider control to the right to increase interval time so that the alarm will only

be triggered when the movement lasts longer. Move to the left to reduce the interval

Region Definition:

 Define detection zone: To detect General Motion, you have to define a detection zone. Left-click and

drag the mouse to draw a detection zone. You may define more than one zone on the screen by

repeating the same process. User can also click on “All” button to select the entire detection zone.

Start Simulation: Click the Start Simulation button and test the function on the preview screen.

Sensitivity

Interval

Region

Definition

Start Simulation

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 138 139

No comments

Levelone FCS-8006 User Manual Page 59