Levelone FCS-8006 User Manual download pdf (Page 78)

Intelligent Surveillance Solution

LevelOne IP CamSecure

- 77 -

5.5 Setting – Hotline

*Hotline is only in IP CamSecure Pro.

Configure the settings of various contacts or devices, including E-mail, FTP, GSM modem and Telephone calls

which will be triggered upon event detection.

E-mail: Input the following information: Server, Port, and Sender’s E-mail address, E-mail’s subject title, Body

content and SSL option for encrypted transmission. Click on the Send Test Mail button to test the settings.

Note: * indicates mandatory fields

FTP: Input the following information: server, Port, Login ID, Password, and Upload directory, according to your

FTP type to enable/disable Passive mode. You may click on the Upload Test File button to test the settings.

Note: * indicates mandatory fields

Telephone: Select the modem that the system is going to dial the info call with, and then insert the phone

number you want to dial to. (A modem is required for voice transition.)

Note: 1. You must use a modem with voice capability.

2. You may select a Wave format file; it will be played in the phone to alarm the person who picks

up the phone call.

GSM modem: Set the Port and Baud Rate of the GSM modem device, and then enter PIN code. You can

setup the interval of send SMS message. You may click on Test to send a test SMS message.

Note: The interval is set to fix a minimum time period between two SMS messages. If set as 60 min, the

SMS between 60 min would be deleted and not sent to user.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 138 139

No comments

Levelone FCS-8006 User Manual Page 78