Levelone KVM-9006 User Manual download pdf (Page 10)

3 Hardware Installation

3.1 Installation Diagram

It is recommended to power off all the computers and server before the

installation. If it is difficult to turn off the computers, for PS/2 computer,

connect the Transmitter KVM-9006T and KVM-9006R in the following order:

first the PS/2 mouse connector followed by PS/2 keyboard connector, and

then the VGA connector to the computer.

1. Refer to the figure below. Turn the KVM-9006T / KVM-9006R upside

down and plaster it with the four accompanied rubber food pads.

2. Make sure the CAT5 cable is straight through type.

3. Plug one end of CAT5 cable into RJ-45 connector of the KVM-9006T,

and plug the other end of CAT5 cable into RJ-45 port of KVM-9006R.

4. Connect keyboard, mouse and monitor to the KVM-9006T

/KVM-9006R console ports (USB Keyboard/Mouse ports and VGA

port).

5. Connect local computer to KVM-9006T / KVM-9006R with the

accompanied 3-in-1 VGA cable (see section “3-in-1 VGA Cable

Installation” for detailed description).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Levelone KVM-9006 User Manual Page 10