Levelone KVM-9006 User Manual download pdf (Page 12)

4 Operations

4.1 Keyboard Hotkey Commands

You can switch the KVM-9006R between “Local Host” port and “RJ-45” port

through simple key sequences made by the remote console side. To send

commands to the KVM-9006R, you must press the hotkey (default is

Scroll Lock) twice within 2 seconds. You will hear a beep sound confirming

you are in the hotkey mode. Then you have to enter command in 2 seconds.

If you do not press any key during hotkey mode over 2 seconds the hotkey

mode will be terminated and back to normal state.

Example:

The table below lists all the supported hotkey commands.

Command

Function

To switch between Local and Remote ports

To turn the beep sound on or off

To activate the Auto-Scan function. Auto-scan Remote

and Local port every 8 seconds repeatedly.

For auto-adjust video signal of remote port to optimum

Scroll

Lock

Scroll

Lock

Switch between Local and Remote Site

Default Hotkey: Scroll Lock

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

No comments

Levelone KVM-9006 User Manual Page 12