LevelOne FCS-5011 User Manual download pdf (Page 65)

Camera control

This section explains how to control the Network Camera’s Pan/Tilt/Zoom operation by

connecting with a PTZ driver or scanner via RS485 interface.

RS485 Settings

Disable: Select this option to disable this function.

PTZ camera: Select this option to enable PTZ operation.

To utilize this feature, please connect the Network Camera with a PTZ driver or scanner via

RS485 interface first. And then you can configure the PTZ driver and RS485 port settings in

the following diagram.

LEVELONE offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D

protocol. If none of the above PTZ drivers is supported by your PTZ scanner, please select

Custom camera (scanner). please refer to the user’s manual of your PTZ scanner to set the

Camera ID, PTZ driver, and Port settings. The Camera ID is necessary for multiple cameras

control. If you select PTZ camera and click Save to enable this function, the camera control

panel will be displayed in the main page as the following diagram:

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 118 119

No comments

LevelOne FCS-5011 User Manual Page 65