LevelOne FCS-5011 User Manual download pdf (Page 68)

To start plotting an event, it is suggested to configure server and media columns first so that

the Network Camera will know what action shall be performed when a trigger is activated.

Media Settings

In Media Settings column, click Add to open the media setting page. In this page, you can

specify what kind of media to send when a trigger is activated. A total of five media settings

can be configured.

Media name: Enter a descriptive name for the media setting.

Media Type: There are three choices of media types available: Snapshot, Video Clip, and

System log.

Snapshot: Select to send snapshots when a trigger is activated.

■ Source: Select to take snapshots from stream 1 or stream 2.

■ Send pre-event images

The Network Camera has a buffer area; it temporarily holds data up to a certain limit. Specify

to capture how many images before a trigger is activated. Up to seven images can be

generated.

■ Send post-event images

Specify to capture how many images after a trigger is activated. Up to seven images can be

generated.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 118 119

No comments

LevelOne FCS-5011 User Manual Page 68