Levelone GTL-2690 User Manual download pdf (Page 339)

100

101

IP Routing

19-22

Web - Click IP, Routing, Static Routes.

Figure 19-12 IP Static Routes

CLI - This example forwards all traffic for subnet 192.168.1.0 to the router

192.168.5.254, using the default metric of 1.

Displaying the Routing Table

You can display all the routes that can be accessed via the local network interfaces,

through static routes, or through a dynamically learned route. If route information is

available through more than one of these methods, the priority for route selection is

local, static, and then dynamic. Also note that the route for a local interface is not

enabled (i.e., listed in the routing table) unless there is at least one active link

connected to that interface.

Command Attributes

• Interface – Index number of the IP interface.

• IP Address – IP address of the destination network, subnetwork, or host.

Note that the address 0.0.0.0 indicates the default gateway for this router.

• Netmask – Network mask for the associated IP subnet. This mask identifies the

host address bits used for routing to specific subnets.

• Next Hop – The IP address of the next hop (or gateway) in this route.

• Protocol – The protocol which generated this route information.

(Options: Local, Static, RIP, OSPF)

• Metric – Cost for this interface.

• Entry Count – The number of table entries.

Console(config)#ip route 192.168.1.0 255.255.255.0 192.168.5.254 42-2

Console(config)#

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 788 789

Comments to this Manuals

No comments

Levelone GTL-2690 User Manual Page 339

Comments to this Manuals

Related products and manuals for Routers Levelone GTL-2690