LevelOne ProCon GSW-2692 User Manual download pdf (Page 187)

Command Groups

4-9

Command Groups

The system commands can be broken down into the functional groups shown below.

The access mode shown in the following tables is indicated by these abbreviations:

NE (Normal Exec) IC (Interface Configuration)

PE (Privileged Exec) LC (Line Configuration)

GC (Global Configuration) VC (VLAN Database Configuration)

ACL (Access Control List Configuration)

Table 4-4 Command Groups

Command Group Description Page

Line Sets communication parameters for the serial port and Telnet,

including baud rate and console time-out

4-10

General Basic commands for entering privileged access mode, restarting the

system, or quitting the CLI

4-19

System Management Controls system logs, system passwords, user name, browser

management options, and a variety of other system information

4-24

Flash/File Manages code image or switch configuration files 4-65

Authentication Configures logon access using local or remote authentication;

also configures port security and IEEE 802.1X port access control

4-71

Access Control List Provides filtering for IP frames (based on address, protocol, TCP/UDP

port number or TCP control code) or non-IP frames (based on MAC

address or Ethernet type)

4-89

SNMP Activates authentication failure traps; configures community access

strings, and trap managers; also configures IP address filtering

4-103

Interface Configures the connection parameters for all Ethernet ports,

aggregated links, and VLANs

4-108

Mirror Port Mirrors data to another port for analysis without affecting the data

passing through or the performance of the monitored port

4-119

Rate Limiting Controls the maximum rate for traffic transmitted or received on a port 4-121

Link Aggregation Statically groups multiple ports into a single logical trunk; configures

Link Aggregation Control Protocol for port trunks

4-122

Address Table Configures the address table for filtering specified addresses, displays

current entries, clears the table, or sets the aging time

4-133

Spanning Tree Configures Spanning Tree settings for the switch 4-137

VLANs Configures VLAN settings, and defines port membership for VLAN

groups; also enables or configures private VLANs

4-149

GVRP and

Bridge Extension

Configures GVRP settings that permit automatic VLAN learning;

shows the configuration for the bridge extension MIB

4-164

Priority Sets port priority for untagged frames, selects strict priority or weighted

round robin, relative weight for each priority queue, also sets priority for

TCP traffic types, IP precedence, and DSCP

4-168

Multicast Filtering Configures IGMP multicast filtering, query parameters, and specifies

ports attached to a multicast router

4-181

IP Interface Configures IP address for the switch 4-190

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 389 390

Comments to this Manuals

No comments

LevelOne ProCon GSW-2692 User Manual Page 187

Comments to this Manuals

Related products and manuals for Network switches LevelOne ProCon GSW-2692