LevelOne ProCon GSW-2692 User Manual download pdf (Page 71)

User Authentication

3-35

Web – Click SNMP, Configuration. Fill in the IP address and community string for

each trap manager that will receive these messages, specify the SNMP version,

mark the trap types required, and then click Add.

Figure 3-23 Configuring IP Trap Managers

CLI – This example adds a trap manager and enables both authentication and

link-up, link-down traps.

User Authentication

You can restrict management access to this switch using the following options:

• User Accounts – Manually configure access rights on the switch for specified users.

• Authentication Settings – Use remote authentication to configure access rights.

• HTTPS Settings – Provide a secure web connection.

• SSH Settings – Provide a secure shell (for secure Telnet access).

• Port Security – Configure secure addresses for individual ports.

• 802.1X – Use IEEE 802.1X port authentication to control access to specific ports.

• IP Filter – Filters management access to the web, SNMP or Telnet interface.

Configuring User Accounts

The guest only has read access for most configuration parameters. However, the

administrator has write access for all parameters governing the onboard agent. You

should therefore assign a new administrator password as soon as possible, and

store it in a safe place.

The default guest name is “guest” with the password “guest.” The default

administrator name is “admin” with the password “admin.”

Console(config)#snmp-server host 192.168.1.19 private version 2c 4-105

Console(config)#snmp-server enable traps 4-106

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 389 390

No comments

LevelOne ProCon GSW-2692 User Manual Page 71