LevelOne ProCon GSW-2692 User Manual download pdf (Page 56)

Configuring the Switch

3-20

CLI – Enter the IP address of the TFTP server, specify the source file on the server,

set the startup file name on the switch, and then restart the switch.

To select another configuration file as the start-up configuration, use the boot

system command and then restart the switch.

Console Port Settings

You can access the onboard configuration program by attaching a VT100

compatible device to the switch’s serial console port. Management access through

the console port is controlled by various parameters, including a password, timeouts,

and basic communication settings. These parameters can be configured via the

Web or CLI interface.

Command Attributes

• Login Timeout – Sets the interval that the system waits for a user to log into the

CLI. If a login attempt is not detected within the timeout interval, the connection is

terminated for the session. (Range: 0-300 seconds; Default: 0)

• Exec Timeout – Sets the interval that the system waits until user input is detected.

If user input is not detected within the timeout interval, the current session is

terminated. (Range: 0-65535 seconds; Default: 0 seconds)

• Password Threshold – Sets the password intrusion threshold, which limits the

number of failed logon attempts. When the logon attempt threshold is reached, the

system interface becomes silent for a specified amount of time (set by the Silent

Time parameter) before allowing the next logon attempt.

(Range: 0-120; Default: 3 attempts)

• Silent Time – Sets the amount of time the management console is inaccessible

after the number of unsuccessful logon attempts has been exceeded.

(Range: 0-65535; Default: 0)

• Data Bits – Sets the number of data bits per character that are interpreted and

generated by the console port. If parity is being generated, specify 7 data bits per

character. If no parity is required, specify 8 data bits per character. (Default: 8 bits)

• Parity – Defines the generation of a parity bit. Communication protocols provided

by some terminals can require a specific parity bit setting. Specify Even, Odd, or

None. (Default: None)

Console#copy tftp startup-config 4-65

TFTP server ip address: 192.168.1.19

Source configuration file name: config-startup

Startup configuration file name [] : startup

\Write to FLASH Programming.

-Write to FLASH finish.

Success.

Console#reload

Console#config

Console(config)#boot system config: startup 4-70

Console(config)#exit

Console#reload 4-22

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 389 390

Comments to this Manuals

No comments

LevelOne ProCon GSW-2692 User Manual Page 56

Comments to this Manuals

Related products and manuals for Network switches LevelOne ProCon GSW-2692